Check out our Story in the latest Labels Plus Magazine. Issue 35 March/April 2019

labelsplus _ Labels Plus March 2019, Page 28

ROTA REGISTER SYSTEM S2

 INTRODUCING THE ROTA REGISTER SYSTEM S2

Rotamag Insertion Unit modulus unit

KEY POINTS

• It is perfect for re-inserting for die cutting, re-printing and to insert and position 2 webs.
• Using a line drive encoder and eye mark reader, it controls the positioning and matches to the line speed to control the inserted material in register.
• With a position accuracy of +.02/-.02 and maximum speeds of 40-50mpm, this unit can be easily installed onto your printing press, making it the affordable option for all your re-insertion requirement

Rotary Engineering was established in 1975.

During this time we have manufactured a large range of products. We have a fully equipped CNC Machinery and engineering work shop as well as a fully equipped design and drawing room with mechanical and electrical design using servo drive technology. Rotary Engineering are able to design, build and manufacture complex equipment and special purpose machinery.
Machinery and Specialised Equipment Range

• Label Converting Machines
• Flexo Printing
• Booklet Label
• Digital Finishing Equipment
• Flexo Coaters
• Sheet Batcher Stackers
• Print re-insertion Equipment
• Slitter Rewinder •Specialised Design and Engineered Machines

Peter Jessop, Director of Rotary Engineering, is very proud of the quality and the high standard that Rotary Engineering has to offer.
Rotary Engineering is world class in our field and support our customers to the nth degre

ROTAMAG HIGH SPEED BATCH STACKER

HIGH SPEED STACKER

INCREASE YOUR PRODUCTION UPTO 30%

Fully accurate automatic in line counting and stacking of products, ready for wrapping or boxing. Ideal for laser sheets, mailings, envelopes, pads, cut sets, photo paper and standard and in-mould labels. Can be retro fitted to any web press.

1. Easily Positioned in front of the cut-off point of existing presses.
2. The stacker is fitted with stopper wheels that activate at the pre-set count amount to match the material into the stacker at the pre-set count amount.
3. The infeed table is positioned in front of the existing press delivery table with the height adjustment for the sheets to slow into the new stacker.
4. The Stacker has height adjustment to adjust to the table height of existing presses.
5. The only electrical integration is (1) sensor cable which will read the cylinder gear, (1) air outlet and (1) mains power 20 amp with neutral
6. The ball screw is controlled by servo motor and all settings are done on the touch screen very easily operated.
7. There is side way and front knocking up cylinders to allow a perfect pack delivery. Static and material can vary this.
8. Fork control by pneumatic cylinder in linear bearings heavy duty for long life. Receiving delivery table fully adjustable through touch screen.

Features and benefits

• Can be retro fitted to most offset or flexo presses available for two wide production
• Easily handing of sheeted material and allowing higher speeds of the press
• Also can be purpose built to suit tickets and tag production.
• Proven to up the production output by 30 to 40%
• Less human intervention
• Exact number per pack
• Easily handling of material
• Good return on investment
• Quickly achieved
• Very cost effective and versatile with minutes to position and get running into high speed production